Global Protect VPN - Adding Full Tunnel

About

In order to run the full tunnel VPN in the Global Protect app, you will need to add a second portal address using the instructions below. 

We recommend only using the full tunnel when you need to access a specific UNW resource which isn't accessible via the pa-vpn.unwsp.edu portal or you are connected to an untrusted network where all your communication should be encrypted.

When using the full tunnel VPN, all internet traffic goes through the VPN causing increased latency. Internet browsing will be slower and audio/video conferences may be unusable.

Instructions

  1. Open the Global Protect app from the system tray.

  2. Click on the hamburger menu in the top-right.

  3. Click on Settings.

  4. In the Connections tab, click on the button to add a new portal address.

  5. Enter the new portal address: full-vpn.unwsp.edu

  6. Click Add and then close the settings.

  7. Now you should see a drop down to select a different portal address.

  8. Click the drop down and select the new portal address (such as full-vpn.unwsp.edu).

Video

global_protect_full_vpn.mp4
Video example of setting up the full VPN portal address